Skip to content
ClairleaLock Experts
Open 24/7(289) 806-9103Open 24/7
Roll-up black cloth pouch lying open on a worn wooden bench, holding thin metal probes and hooked tools in separate pockets. — Toronto

Locksmith in Toronto, OntarioChange the locks,keep the peace of mind

Sometimes the honest answer is a full lock change: a cylinder that fights every key, a handle set that no longer matches the door, a break-up where rekeying feels like half a measure. For homes across Toronto we replace the hardware, match the finish to what is already on the house and hand over new keys.

Call (289) 806-9103

Open 24/7 · Toronto

What happened?

Tap the closest match.

Sometimes the honest answer is a full lock change: a cylinder that fights every key, a handle set that no longer matches the door, a break-up where rekeying feels like half a measure. For homes across Toronto we replace the hardware, match the finish to what is already on the house and hand over new keys.

Technician in safety glasses kneeling at a gray commercial door, drilling a steel push bar into place beside an open parts case. — Toronto
Technician fitting a steel door knob into a door beside a deadbolt, with an open tool bag of screwdrivers nearby. — Toronto

Doors that close, lock and stay locked.

When you call from Toronto, a locksmith answers, not a dispatcher reading a script. He asks what the door is doing, tells you what the visit will likely involve, and arranges a time. The assessment and the price happen at the door, once he has seen the hardware. The same person who took the call is the one who does the work.

We serve Toronto from a van stocked for three kinds of door: the front door of a home, the back door of a business and the driver's door of a vehicle. Different tools, one approach. We confirm you are entitled to access, explain the plan, do the work cleanly and test every key and lock before we consider the visit finished.

31years in business

24/7open every day

  • Clear about who can get in. After any rekey or replacement we tell you exactly which keys work and how many copies exist. Key control is the point, and you should have the full picture.
  • Careful with the building. We protect floors and finishes, work around your day where we can, and treat a shop or office with the same care as a home.
  • The choice explained in your terms. Rather than product names, we talk about what each option means for you: who has access, how it copes with weather, how easy it is to change later.
Call (289) 806-9103

Toronto

Request high-security locks for your Toronto home

Locks on homes and businesses in Toronto go through the same stages: they get installed, they wear, they need rekeying when people change, and eventually they are upgraded or replaced. The services here follow that life cycle so you can find the right one at whatever stage your door has reached.

Ontario

Toronto information

Town
Toronto, Ontario
In business
31 years
Hours
Open 24/7

Nearby areas

2021 Census

What it means at the door

About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Older homes

Period hardware on older homes deserves matching parts, not a mismatched modern set. A locksmith who works among such houses keeps finishes and styles that suit them, so a repaired or replaced lock still looks like it belongs to the door.

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Townhouses share walls but usually have their own front door and often a back door or garage. Keying both alike, and checking the strike on the less-used door, is the everyday work in a neighbourhood of attached homes.

Source: Statistics Canada, 2021 Census of Population.

High security

High Security Locks

Key control is the part people underrate. A patented keyway means blanks are not sold openly and a copy needs an authorised name, so the count of keys stays known. This section explains how that works alongside the hardware that resists force.

Drawing of a front door with four numbered upgrades: 1 a restricted key, 2 the deadbolt cylinder, 3 a cut through the frame showing the bolt in a reinforced strike held by long screws, 4 the door itself. 1 2 3 4
  1. High Security Locks

    You have lost count of how many people have had a key to your house over the years: cleaners, a contractor, a former partner, the previous owner's family.

  2. Lock Replacement & Upgrade

    Someone tried the back door while you were away.

  3. Deadbolt Installation

    The bolt on the front door is keyed on both sides.

  4. Break-In Damage Lock Repair

    There is a hole where the cylinder used to be.

High Security Locks
Person holding a clipboard beside a closed black safe with a circular keypad in a carpeted room. — Safe Installation & Servicing, Toronto

High security

Safes

Safe Opening & Combination Change

A software update reset the clinic's small safe overnight, and the receptionist's usual code now does nothing on a keypad that lights up but goes no further.

Safe Installation & Servicing

A homeowner inherited a heavy old dial safe from a parent's house, moved it into the new place, and has no idea whether the bolt-work still works, whether the lock is sound, or how it should be anchored.

Which fix fits?

That key had been bending a little for years, and you kept straightening it.

Sensible optionBroken Key Extraction

WhyIf a key has just snapped in your lock, the most helpful thing you can do is nothing further to the lock.

The kids get home before you do and the spare key has been lost twice this school year.

Sensible optionSmart Lock Installation

WhyA smart lock fitted by a locksmith keeps a way in that works when the battery or network fails, a mechanical key on many models or an external battery contact on key-free ones.

The pharmacy's drop safe has a keypad that finally lost power for good, and the little override key that was supposed to live behind the counter cannot be found anywhere.

Sensible optionSafe Opening & Combination Change

WhyA safe built to protect firearms is opened with the same care as any other, but the aftermath gets one extra look: once the door is open, the storage arrangement inside is checked against what the applicable federal rules for secure firearms storage expect, since a business handling those items answers to those rules whether or not the lock itself needed attention.

A new hire at the shop gets handed whatever spare key happens to be in the drawer, and it turns out to open the stockroom, the back office and the safe room all at once.

Sensible optionMaster Key System Design

WhyA master key hierarchy usually has three layers.

Minus twenty outside, the fob button does nothing, and the door keyhole has a crust of road salt over it because you have not used a metal key in that car since the day you bought it.

Sensible optionCar Key Replacement

WhyCar key replacement means producing a key that works your specific vehicle when the original is lost, broken, stolen or no longer recognized.

A teenager just passed a driving test and reasonably wants a key of their own rather than negotiating over the family's single copy every time the car is needed.

Sensible optionSpare Car Key Duplication

WhyA vehicle that arrives with only one working key is a common situation after a private sale or an estate transfer, and it is one of the more straightforward calls a locksmith takes.

The remote fob has gone silent, the doors won't unlock with a button press, and the little emergency blade tucked inside it has not been used since the day the car was bought.

Sensible optionTransponder Key Programming

WhyTransponder-based immobilizers became mandatory equipment on new vehicles sold across the country from September 2007 onward, though many manufacturers had already been fitting them for years before that date.

Your key turns smoothly in the driver's door, the same as it always has, but the button underneath stays down and the latch never releases.

Sensible optionVehicle Lock Repair

WhyWeather leaves its mark on vehicle locks over the years.

The key turns half a rotation in the ignition, catches, then the blade lets go with a small snap.

Sensible optionMotorcycle & Scooter Keys

WhyA motorcycle rarely has just one lock.

How a visit goes

Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

Illustration: a phone ringing in front of the locksmith’s shop
  1. Illustration: a ringing phone at the shop, then a work van following a route across a small map to the customer’s house

    01

    A look inside the keyway

    We check how deep the fragment sits and whether the cylinder was already worn or dry. That tells us how to draw the piece out without pushing it further.

  2. Illustration: the van outside the house, a photo ID card by the front door, then the options laid out and one chosen

    02

    Drawing the piece out

    With extraction tools and patience the broken blade comes out whole. We clean and lubricate the cylinder so the next key goes in smoothly.

  3. Illustration: a key turned in the deadbolt of the front door, with a check mark beside it

    03

    Cutting a fresh key

    A key that snapped was usually tired. We cut a new one from the two halves or from the lock itself, test it and suggest retiring any other worn copies.

Person seated at a wooden table examining a brass mortise lock body, with a tool roll, small lock parts and a mug. — Toronto
Technician holding a three-button key fob at a workbench with a tablet, two spare fobs, a notebook and a pegboard behind. — Toronto
White door with a lever handle and an empty round bore above it, beside a toolbox and a deadbolt on a towel. — Toronto
Technician in safety glasses holding a steel deadbolt with a keyway beside a splintered door edge and a tool case. — Toronto
Person holding a key beside a brass-colored deadbolt on an open painted door while another person watches from inside. — Home Lockout Service, Toronto
Technician examining detached commercial lock hardware on a table outside a shop entrance. — Business Lockout Service, Toronto

Good days.
Start with
a turn.

1/9Broken Key Extraction

That key had been bending a little for years, and you kept straightening it. Today it finally cracked at the deepest cut. The stub is in the lock, and the spare you found goes in a few millimetres and stops against it.

Broken Key Extraction

2/9Smart Lock Installation

The kids get home before you do and the spare key has been lost twice this school year. A keypad they can tap, plus a message to your phone when the door opens, would take a daily worry off the list.

Smart Lock Installation

3/9Safe Opening & Combination Change

The pharmacy's drop safe has a keypad that finally lost power for good, and the little override key that was supposed to live behind the counter cannot be found anywhere.

Safe Opening & Combination Change

4/9Master Key System Design

A new hire at the shop gets handed whatever spare key happens to be in the drawer, and it turns out to open the stockroom, the back office and the safe room all at once. The owner realizes nobody actually decided who should open what.

Master Key System Design

5/9Car Key Replacement

Minus twenty outside, the fob button does nothing, and the door keyhole has a crust of road salt over it because you have not used a metal key in that car since the day you bought it.

Car Key Replacement

6/9Spare Car Key Duplication

A teenager just passed a driving test and reasonably wants a key of their own rather than negotiating over the family's single copy every time the car is needed. Two drivers and one key keep colliding on the same schedule.

Spare Car Key Duplication

7/9Transponder Key Programming

The remote fob has gone silent, the doors won't unlock with a button press, and the little emergency blade tucked inside it has not been used since the day the car was bought. Nobody remembers exactly where the metal edge is supposed to go once it's out.

Transponder Key Programming

8/9Vehicle Lock Repair

Your key turns smoothly in the driver's door, the same as it always has, but the button underneath stays down and the latch never releases. The passenger side opens without any trouble, so the key itself is clearly not the source of the trouble.

Vehicle Lock Repair

9/9Motorcycle & Scooter Keys

The key turns half a rotation in the ignition, catches, then the blade lets go with a small snap. The bow is still in your hand; the rest of it is somewhere inside a lock that now has nothing to grip.

Motorcycle & Scooter Keys

Good questions about locks

Questions · (289) 806-9103

It broke while I was locking up and now the door is open. What should I do?

Stay with the door if you can, or ask a neighbour to keep an eye on it, and call. When the locksmith arrives the fragment is removed and securing the door comes ahead of everything else, so you can leave. If the cylinder needs more than a clean, a replacement goes on during that visit rather than leaving the door on a latch overnight.

I rent. Can I have a smart lock installed?

Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.

Do drop safes or under-counter cash safes work the same way as a larger floor safe?

The identification step is the same regardless of size, but the lock inside is not assumed from the safe's size: a small drop safe or under-counter unit can carry anything from a basic keypad to a high-security lock, so each is identified on its own before manipulation, reset or a combination change proceeds, with the same care around authority and aftercare applying equally.

How long does designing and installing a master key system take?

It depends on the number of doors and levels involved. A small business with a handful of doors and one or two levels moves through assessment, pinning and testing in less time on site than a multi-floor property with several departments and a top-level master, where more doors, more testing and more keys to cut all add to the work involved.

Can you make a key if every key to the car is gone?

Often, yes, for vehicles with a supported conventional key system: the car is opened, a blade is produced by decoding the door lock or retrieving the factory key code, and the immobilizer is reset so the missing keys are erased before new ones are stored. A key-card or phone-key vehicle, or one needing a dealer procedure, follows its own route instead, which is why the VIN is asked for on the first call.

Should I get the locks rekeyed when I get a spare, or is that a different service?

They are related but not identical, since a car's door and ignition locks are a separate mechanical layer from the immobilizer even though both systems usually get touched in the same visit. Making a spare and removing a genuinely unaccounted-for key's electronic access are handled together, and if that lost key's blade could still turn a matching door cylinder by hand, the locksmith rekeys that cylinder as part of the same appointment.

My key turns and the engine cranks, but it won't start. Is that this?

That pattern, the starter turning the engine over without it catching, often points to the key or immobilizer rather than a fuel or ignition-timing fault. A flashing security light on the dashboard while this happens adds to that picture. A diagnosis, checking whether the vehicle actually recognizes the key's chip, is what confirms which one it is before any programming begins.

Why has my key fob suddenly stopped working?

A dead coin-cell battery is the most common reason, and it is a straightforward fix once the fob is opened. Less often, the fob has lost its pairing with the vehicle or its case has cracked and let in moisture, both of which a locksmith can check and address.

Do all motorcycles have an immobiliser these days?

Not all of them. Many machines built in roughly the last two decades carry a transponder chip and an ignition module that checks it, but plenty of smaller-displacement bikes, scooters and older machines still use a purely mechanical lock with no electronic layer at all. The locksmith checks for a coil around the ignition barrel and asks how the engine behaves with the current key to tell which type is on hand.

Request a visit

When you call from Toronto, a locksmith answers, not a dispatcher reading a script. He asks what the door is doing, tells you what the visit will likely involve, and arranges a time. The assessment and the price happen at the door, once he has seen the hardware. The same person who took the call is the one who does the work.

Call

(289) 806-9103

Open 24/7

Call(289) 806-9103

Request a visit

Or call (289) 806-9103 · open 24/7